Layer Symbology
The Symbology tools/functions are based on supported styles by geoserver. Please consult with GeoServer User manual for more information.
Coverage Symbology
You can Add or Remove a rule to the table. It is easier to decide on appropriate rules when you look at the Statistics first. You can then choose the visualization of your layer colors under Type. The default Type is Interpolation ("ramp"). To select the appropriate type please refer to ColorMap type. If you select Intervals, the first rule in the table should refer to No Data Value of the coverage.
To apply new rules press Apply button.
Point Symbology
Figure 2: Symbology for Point Layers. | File:Symbology Point.JPG | File:PointSymbologyFilter.JPG | File:PointSymbologyGraphic.JPG |
You can Add or Remove a rule to the table.
To modify a rule, select the rule and change its Filter or Graphic.
To modify the filter click Filter. In the Filter window (Figure 2 center), select the property, condition and value to be used. If there is more than one condition in a Filter window, they must be connected by selecting a proper condition from the dropdown list in the toolbar.
To see the statistics of a selected property, use the icon.
To modify the graphic click Graphic. In the Graphic window (Figure 2 right), select the marker, its color and its opacity.
To apply new rules click Apply.
Polygon Symbology
You can Add or Remove a rule to the table. You can edit the Fill and Line of your polygons and apply Filters for these rules with the standard commands (<,>,=<,>=,=). Finalize your edits by clicking Apply.